Cobra CP-2205-2600-G Champion Series Gold Edition Multirotor Motor, Kv=2600

The Cobra Champion series motors are the most powerful versions ever made for FPV Racing! A completely new design that increases cooling and efficiency, these motors provide the ultimate power for your FPV Racing Quads. The new Gold Edition version of this motor has all the power and performance of the standard version, but with the extra "Bling" that will make your FPV Quad really stand out on the flight line!The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the CP-2205 motors come without bullet connectors ,and feature extended pre-tinned motor leads that are 2-1/4 inches (55mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.



The CP-2205 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included nylon insert prop nut, which has an integrated prop washer, provides a solid attachment for your propellers that will not loosen up and slip during use.



Also included with every Cobra CP-2205 Series Motor is a complete accessory pack, which includes everything you need to securely mount the motor to your quad frame, and to mount the prop to the motor.



The hardware kit contains the following items:



● Four M3x6mm Socket Head Motor Mount Screws

● Four M3 Flat Washers

● One Locking Prop Nut with Nylon Insert





Click here for the Cobra CP-2205-2600 Propeller Data Chart

 
   

Cobra CP-2205/2600 Motor Specifications
Stator Diameter	22.0 mm (0.866 in)
Stator Thickness	5.0 mm (0.197 in)
Number of Stator Slots	12
Number of Magnet Poles	14
Motor Wind	26 Turn Delta
Motor Kv Value	2600 RPM per Volt
No Load Current (Io)	1.45 Amps @ 10 Volts
Motor Resistance (Rm) per Phase	0.072 Ohms
Motor Resistance (Rm) Phase to Phase	0.048 Ohms
Maximum Continuous Current	25 Amps
Max Continuous Power (3-cell Li-Po)	275 Watts
Max Continuous Power (4-cell Li-Po)	370 Watts
Motor Weight	29.8 grams (1.05 oz.)
Outside Diameter	27.9 mm (1.098 in.)
Motor Shaft Diameter	3.00 mm (0.118 in.)
Prop Shaft Diameter	5.00 mm (0.197 in.)
Motor Body Length	16.1 mm (0.634 in.)
Overall Shaft Length	33.6 mm (1.323 in.)
Motor Timing	5-10 degrees
PWM Frequency	8 KHz